SuperWall™

    • Wausau’s flagship curtainwall product line
    • 4 3/4”, 6 1/4”, 7 1/4”, 8 1/4” or 10 1/4”  frame depths
    • Several frame depths including cladding for steel tubes
    • 2 1/2” or 3” exterior sight line - Many accent covers available
    • 3/8” thermal separation
SuperWall™

SuperWall™ SSG Four-Sided

    • Several frame depths including cladding for steel tubes
    • Grid frames are factory fabricated and shipped knocked-down (KD) for field assembly
    • All grid framing is interchangeable with standard Wausau SuperWallTM systems
    • Carrier frames are factory four-side structural glazed in a controlled environment
SuperWall™ SSG Four-Sided

HP-Wall

    • Best-in-class thermal performance lowers operating costs and reduces necessary HVAC capacity
    • Condensation resistance for high humidity occupancies
    • 2 1/2” exterior sightline
    • Accepts triple insulating glass
HP-Wall

INvision™ HR and HRX Unitized Window Wall and Curtainwall

    • 6-1/4", 6-1/2" and 7-1/4" frame depth with polyamide thermal barrier
    • Narrow 2 1/2” mullion sightlines
    • Transitions seamlessly from curtainwall to window wall
    • Pressure-equalized rain screen design
    • 15 psf static and dynamic water resistance
INvision™ HR and HRX Unitized Window Wall and Curtainwall

INvision™ 7250 and 7250i-UW Unitized Curtainwall

    • Engineered to meet typical institutional buildings’ span and wind load requirements
    • Interlocking frame design accommodates seismic, live load and thermal building movements
    • Two lines of defense against air and water infiltration- Pressure-equalized rain screen design
    • Water control and drainage at each unit
    • Two-level thermal barrier frames (7250i-UW) or thermally-improved (7250-UW)
INvision™ 7250 and 7250i-UW  Unitized Curtainwall

INvision™ RX Unitized Window Wall

    • 4 3/4” or 6 1/4” frame depth
    • Thermally improved
    • Captured or vertical structural glazed
    • Narrow 2 1/4” sightlines
INvision™ RX  Unitized Window Wall

INvision™ 8000 and 8000i Blast Unitized Wall

    • Designed for compliance with GSA ISC Security Design Criteria and Department of Defense UFC 4-010-01 requirements
    • Blast performance exceeding 10 psi peak pressure, 89 psi-msec impulse
    • Accepts a variety of security glazing types
    • Interlocking frame design accommodates seismic, live load and thermal building movements
    • Pressure-equalized rain screen design
INvision™ 8000 and 8000i  Blast Unitized Wall

ClearStory™

    • Control solar heat gain and harvest natural daylight to meet sustainable design goals
    • A variety of pre-engineered configurations and types
    • Extruded blades, perforated sheet, “catwalk” grids or solid shading
    • Modular design and integral alignment features for ease of installation
ClearStory™

3250-Z and 4250-Z Zero Sightline Insert Vents

    3250-Z Series

    • 3 1/4” frame depth with polyurethane or polyamide thermal barrier

    4250-Z Series

    • 4” frame depth
3250-Z and 4250-Z  Zero Sightline Insert Vents

4000i and 4000i-DT Psychiatric

    • 4” frame depth with polyamide nylon thermal barrier
    • AAMA AW-120 air, water and structural performance
    • Fixed or side-hinged in-swing casements for cleaning or custodial ventilation
    • Mitered and corner-blocked frame and vent construction
4000i and 4000i-DT Psychiatric

Standard 2200, 2250, 3250 and 4250

    • 2 1/2”, 3 1/2” and 4 1/2” frame depth with polyurethane thermal barrier
    • AAMA AW-70 Performance Class
    • Fixed, project-out awning, project-in hopper, or casement
    • Flush vent construction reduces collection of dust and debris
    • Dual- or triple-glazed option with hinged or lift-out access panels
Standard 2200, 2250, 3250 and 4250

3250-HP Hurricane

    • 3 1/2” frame depth with polyurethane thermal barrier
    • AAMA AW-120 Performance Class
    • Tested for small and large missile impact followed by cyclical pressure structural loading
    • Fixed or project-in casement only
3250-HP Hurricane

Custom Window™ by Wausau 8200, 8250, 8260 and 8400

    • 2” frame depth with polyurethane thermal barrier (8200 and 8250), 3 1/4 “ frame depth (8260) or 4” frame depth (8400)
    • AAMA AW-80 Performance Class
    • Fixed, project-out awning, project-in hopper, or casement
    • 0.094” principal wall thickness (0.125” on 8200)
Custom Window™ by Wausau 8200, 8250, 8260 and 8400

TD-4250i Terrace Doors

    • 4 1/2” frame depth with polyamide thermal barrier – Integrates with other Wausau products
    • AAMA AW-60 (single) AW-50 (French) Performance Class
    • In-swing or out-swing operation
TD-4250i Terrace Doors

CrossTrak™

    • 5-7/8" frame depth for high spans and wind loads; polyamide thermal barrier
    • Half-slide, end-slide, center-slide, and center-open two-track configurations side-stack with INvent™ fixed lites
CrossTrak™

Trim and Accessories