INvent™

    2250i, 3250i and 4250i INventTM  Series
    • 2 1/2”, 3 1/2” and 4 1/2” frame depth with polyamide thermal barrier
    • AAMA AW-100 Performance Class
    4250i-OS Offset INventTM  Series
    • 4 1/2” frame depth with polyamide thermal barrier
    • AAMA AW-100 Performance Class
INvent™

SuperWall™

    • Wausau’s flagship curtainwall product line
    • 4 3/4”, 6 1/4”, 7 1/4”, 8 1/4” or 10 1/4”  frame depths
    • Several frame depths including cladding for steel tubes
    • 2 1/2” or 3” exterior sight line - Many accent covers available
    • 3/8” thermal separation
SuperWall™

SuperWall™ SSG Four-Sided

    • Several frame depths including cladding for steel tubes
    • Grid frames are factory fabricated and shipped knocked-down (KD) for field assembly
    • All grid framing is interchangeable with standard Wausau SuperWallTM systems
    • Carrier frames are factory four-side structural glazed in a controlled environment
SuperWall™ SSG Four-Sided

HP-Wall

    • Best-in-class thermal performance lowers operating costs and reduces necessary HVAC capacity
    • Condensation resistance for high humidity occupancies
    • 2 1/2” exterior sightline
    • Accepts triple insulating glass
HP-Wall

INvent™ XLT

    2250i, 3250i and 4250i-XLT INventTM  Series
    • 2 7/8”, 3 7/8” and 4 7/8” frame depth with extra-wide polyamide thermal barrier
    • AAMA AW-100 Performance Class
    INventTM 3250i- and 4250i-HP-XLT  Series HURRICANE
    • 3-7/8" (3250i) and 4-7/8" (4250i) frame depth
    • 24mm XLT polyamide thermal barrier
    • ­AAMA AW-100 Architectural Performance Class
INvent™ XLT

INvision™ HR and HRX Unitized Window Wall and Curtainwall

    • 6-1/4", 6-1/2" and 7-1/4" frame depth with polyamide thermal barrier
    • Narrow 2 1/2” mullion sightlines
    • Transitions seamlessly from curtainwall to window wall
    • Pressure-equalized rain screen design
    • 15 psf static and dynamic water resistance
INvision™ HR and HRX Unitized Window Wall and Curtainwall

INvent.PLUS™

    • 3 11/16” frame depth with 44mm GFR polyamide thermal barrier and non-out-gassing polyolefin cavity fillers
    • AAMA AW-100 Performance Class
    • Best-in-class R6 fixed and R5 operable thermal performance.
INvent.PLUS™

INvision™ 7250 and 7250i-UW Unitized Curtainwall

    • Engineered to meet typical institutional buildings’ span and wind load requirements
    • Interlocking frame design accommodates seismic, live load and thermal building movements
    • Two lines of defense against air and water infiltration- Pressure-equalized rain screen design
    • Water control and drainage at each unit
    • Two-level thermal barrier frames (7250i-UW) or thermally-improved (7250-UW)
INvision™ 7250 and 7250i-UW  Unitized Curtainwall

INvision™ RX Unitized Window Wall

    • 4 3/4” or 6 1/4” frame depth
    • Thermally improved
    • Captured or vertical structural glazed
    • Narrow 2 1/4” sightlines
INvision™ RX  Unitized Window Wall

Custom Window™ by Wausau 8300 and 8300i Historical

    • Fluted, stepped “T”, beveled or ogee perimeter glazing rebates to match existing putty-glazed windows
    • AAMA AW-100 Architectural Performance Class - Grids designed for project-specific wind loads
    • 3-1/2" frame depth with polyurethane (8300 Series) or polyamide thermal barrier (8300i Series)
Custom Window™ by Wausau 8300 and 8300i Historical

INvent™ Retro

    • 2 7/8”, 3 7/8” and 4 7/8” frame depth with extra-wide polyamide thermal barrier
    • AAMA AW-100 Performance Class
    • Beveled, cove, ogee or square exterior face to replicate putty-glazed window profiles
    • Equal sightline option at vents and fixed lites (2250i-XLT)
INvent™ Retro

INvision™ 8000 and 8000i Blast Unitized Wall

    • Designed for compliance with GSA ISC Security Design Criteria and Department of Defense UFC 4-010-01 requirements
    • Blast performance exceeding 10 psi peak pressure, 89 psi-msec impulse
    • Accepts a variety of security glazing types
    • Interlocking frame design accommodates seismic, live load and thermal building movements
    • Pressure-equalized rain screen design
INvision™ 8000 and 8000i  Blast Unitized Wall

ClearStory™

    • Control solar heat gain and harvest natural daylight to meet sustainable design goals
    • A variety of pre-engineered configurations and types
    • Extruded blades, perforated sheet, “catwalk” grids or solid shading
    • Modular design and integral alignment features for ease of installation
ClearStory™

3250-Z and 4250-Z Zero Sightline Insert Vents

    3250-Z Series

    • 3 1/4” frame depth with polyurethane or polyamide thermal barrier

    4250-Z Series

    • 4” frame depth
3250-Z and 4250-Z  Zero Sightline Insert Vents

Custom Window™ by Wausau 9250 Double Hung

    • Fluted or beveled perimeter glazing rebates to match existing putty-glazed windows
    • AAMA AW-80 Architectural Performance Class - Grids designed for project-specific wind loads
    • 5-7/16" frame depth with polyurethane thermal barrier
Custom Window™ by Wausau 9250 Double Hung

4000i and 4000i-DT Psychiatric

    • 4” frame depth with polyamide nylon thermal barrier
    • AAMA AW-120 air, water and structural performance
    • Fixed or side-hinged in-swing casements for cleaning or custodial ventilation
    • Mitered and corner-blocked frame and vent construction
4000i and 4000i-DT Psychiatric

SEAL™

    • Minimal frame depth to fit within existing window frame openings
    • Enhances thermal and acoustical performance of weather-tight existing windows
    • Side-hinged access doors with custodial locks
    • 5/8” or 1” between-glass Venetian blinds available
SEAL™

Visuline™

    • 3” and 4 1/2” frame depth with polyamide thermal barrier
    • AAMA AW-90 (Fixed and Hopper) AW-135 (Casement) Performance Class
    • Fixed, project-in hopper, or project-in casement only
    • Equal sightlines at vents and fixed lites
Visuline™

Standard 2200, 2250, 3250 and 4250

    • 2 1/2”, 3 1/2” and 4 1/2” frame depth with polyurethane thermal barrier
    • AAMA AW-70 Performance Class
    • Fixed, project-out awning, project-in hopper, or casement
    • Flush vent construction reduces collection of dust and debris
    • Dual- or triple-glazed option with hinged or lift-out access panels
Standard 2200, 2250, 3250 and 4250

3250-HP Hurricane

    • 3 1/2” frame depth with polyurethane thermal barrier
    • AAMA AW-120 Performance Class
    • Tested for small and large missile impact followed by cyclical pressure structural loading
    • Fixed or project-in casement only
3250-HP Hurricane

310i Single Hung

    • 3 1/2” frame depth with polyamide thermal barrier
    • Up to AAMA  AW-100 Performance Class
    • Rigid “five-member” frame construction for ease of installation
    • Sturdy corner-blocked and crimped sash construction
310i Single Hung

3100 Double Hung Side Load

    • 4 1/2” frame depth with polyurethane thermal barrier
    • Up to AAMA  AW-70 Performance Class
    • Flush screen frame
    • Sturdy corner-blocked and crimped sash construction
    • Extruded aluminum or slide-in steel anchors
3100 Double Hung Side Load

3150 and 3151 Double and Single Hung Tilt

    • 4 1/2” frame depth with polyurethane thermal barrier
    • Up to AAMA  AW-70 Performance Class
    • Flush screen frame
3150 and 3151 Double and Single Hung Tilt

410i Single Slide and 4100i Double Slide

    410i-HS Series SINGLE SLIDE
    • 3 1/2” frame depth with polyamide thermal barrier
    4100i-HS Series DOUBLE SLIDE
    • 4 1/2” frame depth with polyamide thermal barrier
410i Single Slide and  4100i Double Slide

2700 and 2760 Acoustical

    • 2700-HSD, 4 1/2" frame depth with non-structural thermal barrier
    • 2760-HSD, 6 3/4" frame depth with optional sound absorption design
2700 and 2760 Acoustical

Custom Window™ by Wausau 8200, 8250, 8260 and 8400

    • 2” frame depth with polyurethane thermal barrier (8200 and 8250), 3 1/4 “ frame depth (8260) or 4” frame depth (8400)
    • AAMA AW-80 Performance Class
    • Fixed, project-out awning, project-in hopper, or casement
    • 0.094” principal wall thickness (0.125” on 8200)
Custom Window™ by Wausau 8200, 8250, 8260 and 8400

TD-4250i Terrace Doors

    • 4 1/2” frame depth with polyamide thermal barrier – Integrates with other Wausau products
    • AAMA AW-60 (single) AW-50 (French) Performance Class
    • In-swing or out-swing operation
TD-4250i Terrace Doors

CrossTrak™

    • 5-7/8" frame depth for high spans and wind loads; polyamide thermal barrier
    • Half-slide, end-slide, center-slide, and center-open two-track configurations side-stack with INvent™ fixed lites
CrossTrak™

D-5100 Sliding Glass Doors

    • 4 1/2” frame depth with polyurethane thermal barrier
    • AAMA AW-60 Performance Class
    • Low maintenance and smooth operation
    • “Inside slide” design with flush exterior screen track
    • Available in half slide, center slide, end slide or center open configurations
D-5100 Sliding Glass Doors

Trim and Accessories