Wausau Market Update »



INvision 5500i-SG

    • 2-1/4" structural silicone-glazed (SSG) mullions and intermediate horizontal framing members
    • 18 mm wide polyamide nylon thermal strut for energy efficiency and condensation resistance
    • Easy-to-install captured head and sill “can” receptors - Flush SSG sill and jamb receptors are available
    • No exterior unit wet sealing required; pressure-equalized, rain screen design
    • Less than 0.06 cfm/sqft air infiltration at 6.24 psf
    • 15 psf water test pressure; static and dynamic
    • Full AAMA 501 test protocol including interstory vertical and horizontal movement; thermal cycling
INvision 5500i-SG

INvision™ HR and HRX Unitized Window Wall and Curtainwall

    • 6-1/4", 6-1/2" and 7-1/4" frame depth with polyamide thermal barrier
    • Narrow 2 1/2” mullion sightlines
    • Transitions seamlessly from curtainwall to window wall
    • Pressure-equalized rain screen design
    • 15 psf static and dynamic water resistance
INvision™ HR and HRX Unitized Window Wall and Curtainwall

INvision™ 7250 and 7250i-UW Unitized Curtainwall

    • Engineered to meet typical institutional buildings’ span and wind load requirements
    • Interlocking frame design accommodates seismic, live load and thermal building movements
    • Two lines of defense against air and water infiltration- Pressure-equalized rain screen design
    • Water control and drainage at each unit
    • Two-level thermal barrier frames (7250i-UW) or thermally-improved (7250-UW)
INvision™ 7250 and 7250i-UW Unitized Curtainwall

INvision™ 8000 and 8000i Blast Unitized Wall

    • Designed for compliance with GSA ISC Security Design Criteria and Department of Defense UFC 4-010-01 requirements
    • Blast performance exceeding 10 psi peak pressure, 89 psi-msec impulse
    • Accepts a variety of security glazing types
    • Interlocking frame design accommodates seismic, live load and thermal building movements
    • Pressure-equalized rain screen design
INvision™ 8000 and 8000i Blast Unitized Wall